NHBB Ball Bearing KSP3L KSP4A KSP5A

CAB bearings Factory is beaings rulman roulment rodamiento rolamento lager Подшипник factory manufactuers suppler authrised distirbutor wholesales sales shop agents.

We produce and deal with oil seals chains industrial belts gearbox parts accessories SKF bearings FAG NSK Timken INA KOYO NTN

www.precision-bearings.com

Spot bearing model table, Model substitution Cross-reference Brand model reference Model substitution Substitute Bearing interchange Bearing brand replacement Model replace

NHBB BASIC P/N	MS27645 DASH NO.		BORE d		O.D. D		RINg WIDTH				MIS- AlIgNMENT ANglE† M°		BAll COMPlEMENT			RINg SHOUlDER DIAMETER		RINg CHAMFER X 45°		lOAD RATINgS (lBS.)				APPROX. WEIgHT	MAX. STARTINg TORqUE^	MAX. AXIAl INTERNAl ClEARANCE	MIN. SEAl BREAKOUT TORqUE*
																				STATIC		DyNAMIC RADIAl+
							OUTER H		INNER W				NO.	DIA.		OUTER F	INNER E	OUTER A	INNER C			RINg ROTATION
																				RADIAl	THRUST	INNER	OUTER
			+.0000 -.0005		+.0000 -.0005		+.000 -.005		+.000 -.005							REF.	REF.	+.015 -.000	+.015 -.000	RADIAL LIMIT	AxIAL LIMIT			LBS.	oz.-IN.[		LBS.-IN.
KSP3L	-3A		0.1900		0.6250		0.203		0.245		± 10		13	3/32		0.549	0.278	0.016	0.005	550	100	550	480	0.01	1.0	0.023	4.0
KSP4A	-4A		0.2500		0.7500		0.219		0.281		± 8		12	1/8		0.636	0.329	0.016	0.005	900	200	900	770	0.01	1.0	0.025	6.0
KSP5A	-5A		0.3125		0.8125		0.234		0.297		± 8		14	0.122		0.712	0.388	0.016	0.015	1000	200	950	815	0.02	2.0	0.028	10.0
KSP6A	-6A		0.3750		0.8750		0.250		0.313		± 8		15	1/8		0.763	0.463	0.016	0.016	1120	200	1120	990	0.02	3.0	0.030	8.0
KSP3	-3		0.1900		0.7774		0.270		0.297		± 10		12	1/8		0.656	0.314	0.022	0.005	900	200	900	770	0.03	1.0	0.023	6.0
KSP4	-4		0.2500		0.9014		0.335		0.484		± 10		13	9/64		0.756	0.399	0.032	0.005	1410	300	1230	1230	0.04	1.0	0.025	5.0
KSP5	-5		0.3125		1.2500		0.375		0.558		± 10		13	3/16		1.089	0.569	0.032	0.015	2190	300	2190	1890	0.10	2.0	0.028	16.0
KSP6	-6		0.3750		1.4375		0.469		0.620		± 10		13	7/32		1.185	0.614	0.032	0.015	2980	400	2980	2580	0.15	3.0	0.030	18.0
KSP8	-8		0.5000		1.6875		0.500		0.620		± 10		16	7/32		1.418	0.811	0.044	0.015	3670	500	3670	3290	0.23	4.0	0.032	20.0
KSP10	-10		0.6250		1.9375		0.625		0.813		± 10		14	9/32		1.647	0.925	0.044	0.015	5320	600	4980	4360	0.37	6.0	0.034	25.0
Radial internal clearance: .0000 to .0010
MKSP-, MKSP-A Precision Series
NHBB BASIC P/N		BORE d		O.D. D		RINg WIDTH				MIS- AlIgNMENT ANglE† M°		BAll COMPlEMENT			RINg SHOUlDER DIAMETER			RINg CHAMFER X 45°		lOAD RATINgS (lBS.)				APPROX. WEIgHT	MAX. STARTINg TORqUE^	MAX. AXIAl INTERNAl ClEARANCE	MIN. SEAl BREAKOUT TORqUE*
																				STATIC		DyNAMIC RADIAl+
						OUTER H		INNER W				NO.		DIA.	OUTER F		INNER E	OUTER A	INNER C			RINg ROTATION
																				RADIAl	THRUST	INNER	OUTER
		+.0000 -.0003		+.0000 -.0004		+.000 -.005		+.0000 -.0025							REF.		REF.	+.015 -.000	+.015 -.000	RADIAL LIMIT	AxIAL LIMIT			LBS.	oz.-IN.[		LBS.-IN.
MKSP3L		0.1900		0.6250		0.203		0.2450		± 10		13		3/32	0.549		0.278	0.016	0.005	550	100	550	480	0.01	1.0	0.023	4.0
MKSP4A		0.2500		0.7500		0.219		0.2810		± 8		12		1/8	0.636		0.329	0.016	0.005	900	200	900	770	0.01	1.0	0.025	6.0
MKSP5A		0.3125		0.8125		0.234		0.2970		± 8		14		0.122	0.712		0.388	0.016	0.015	1000	200	950	815	0.02	2.0	0.028	10.0
MKSP6A		0.3750		0.8750		0.250		0.3130		± 8		15		1/8	0.763		0.463	0.016	0.016	1120	200	1120	990	0.02	3.0	0.030	8.0
MKSP3		0.1900		0.7774		0.270		0.2970		± 10		12		1/8	0.656		0.314	0.022	0.005	900	200	900	770	0.03	1.0	0.023	6.0
MKSP4		0.2500		0.9014		0.335		0.4840		± 10		13		9/64	0.756		0.399	0.032	0.005	1410	300	1230	1230	0.04	1.0	0.025	5.0
MKSP5		0.3125		1.2500		0.375		0.5580		± 10		13		3/16	1.089		0.569	0.032	0.015	2190	300	2190	1890	0.10	2.0	0.028	16.0
MKSP6		0.3750		1.4375		0.469		0.6200		± 10		13		7/32	1.185		0.614	0.032	0.015	2980	400	2980	2580	0.15	3.0	0.030	18.0
MKSP8		0.5000		1.6875		0.500		0.6200		± 10		16		7/32	1.418		0.811	0.044	0.015	3670	500	3670	3290	0.23	4.0	0.032	20.0
MKSP10		0.6250		1.9375		0.625		0.8130		± 10		14		9/32	1.647		0.925	0.044	0.015	5320	600	4980	4360	0.37	6.0	0.034	25.0

NHBB BASIC P/N	MS27643 DASH NO.		BORE d		O.D. D		RINg WIDTH			MIS- AlIgNMENT ANglE† M°	BAll COMPlEMENT		RINg SHOUlDER DIAMETER		RINg CHAMFER X 45°			lOAD RATINgS (lBS.)				APPROX. WEIgHT	MAX. STARTINg TORqUE^	MIN. SEAl BREAKOUT TORqUE*
																		STATIC		DyNAMIC RADIAl+
							OUTER H		INNER W		NO.	DIA.	OUTER F	INNER E	OUTER A	INNER C				RINg ROTATION
																		RADIAl	THRUST	INNER	OUTER
			+.0000 -.0010		+.0000 -.0010		+.000 -.005		+.000 -.005				REF.	REF.	+.015 -.000	+.015 -.000		RADIAL LIMIT	AxIAL LIMIT			LBS.	oz.-IN.	LBS.-IN.
DSP3	-3		0.1900		0.7774		0.392		0.500	± 10	24	1/8	0.611	0.307	0.022	0.005		1420	200	1420	1220	0.04	1.0	8.0
DSP4	-4		0.2500		0.9014		0.464		0.687	± 10	30	1/8	0.740	0.432	0.032	0.005		1780	300	1780	1600	0.06	1.0	12.0
DSP5	-5		0.3125		1.2500		0.656		0.812	± 10	28	3/16	1.004	0.515	0.032	0.015		3740	600	3740	3300	0.16	3.0	28.0
DSP6	-6		0.3750		1.4375		0.750		0.937	± 10	28	7/32	1.169	0.567	0.032	0.015		5100	800	4980	4370	0.24	4.0	45.0
DSP8	-8		0.5000		1.6875		0.812		1.000	± 10	30	1/4	1.399	0.776	0.044	0.015		7120	1000	6340	5570	0.36	5.0	60.0
DSP10	-10		0.6250		1.9375		0.937		1.125	± 10	30	9/32	1.590	0.872	0.044	0.015		9000	1300	7780	6860	0.53	6.0	78.0
Radial internal clearance: .0000 to .0010
MDSP- Precision Series
NHBB BASIC P/N		BORE d		O.D. D		RINg WIDTH				MIS- AlIgNMENT ANglE† M°	BAll COMPlEMENT		RINg SHOUlDER DIAMETER		RINg CHAMFER X 45°		lOAD RATINgS (lBS.)					APPROX. WEIgHT	MAX. STARTINg TORqUE^	MIN. SEAl BREAKOUT TORqUE*
																	STATIC			DyNAMIC RADIAl+
						OUTER H		INNER W			NO.	DIA.	OUTER F	INNER E	OUTER A	INNER C				RINg ROTATION
																	RADIAl		THRUST	INNER	OUTER
		+.0000 -.0003		+.0000 -.0004		+.000 -.005		+.0000 -.0025					REF.	REF.	+.015 -.000	+.015 -.000	RADIAL LIMIT		AxIAL LIMIT			LBS.	oz.-IN.	LBS.-IN.
MDSP3		0.1900		0.7774		0.392		0.5000		± 10	24	1/8	0.611	0.307	0.022	0.005	1420		200	1420	1220	0.04	1.0	8.0
MDSP4		0.2500		0.9014		0.464		0.6870		± 10	30	1/8	0.740	0.432	0.032	0.005	1780		300	1780	1600	0.06	1.0	12.0
MDSP5		0.3125		1.2500		0.656		0.8120		± 10	28	3/16	1.004	0.515	0.032	0.015	3740		600	3740	3300	0.16	3.0	28.0
MDSP6		0.3750		1.4375		0.750		0.9370		± 10	28	7/32	1.169	0.567	0.032	0.015	5100		800	4980	4370	0.24	4.0	45.0
MDSP8		0.5000		1.6875		0.812		1.0000		± 10	30	1/4	1.399	0.776	0.044	0.015	7120		1000	6340	5570	0.36	5.0	60.0
MDSP10		0.6250		1.9375		0.937		1.1250		± 10	30	9/32	1.590	0.872	0.044	0.015	9000		1300	7780	6860	0.53	6.0	78.0

NHBB BASIC P/N	MS27644 DASH NO.		BORE d		O.D. D	RINg WIDTH			BAll COMPlEMENT				RINg SHOUlDER DIAMETER				RINg CHAMFER X 45°				lOAD RATINgS (lBS.)								MAX. AXIAl PlAy	APPROX. WEIgHT	MAX. STARTINg TORqUE^
																					STATIC				DyNAMIC RADIAl+
						OUTER H	INNER W		NO.		DIA.		OUTER F		INNER E		OUTER A		INNER C						RINg ROTATION
																					RADIAl		THRUST		INNER		OUTER
			+.0000 -.0005		+.0000 -.0005	+.000 -.005	+.000 -.005						REF.		REF.		+.015 -.000		+.015 -.000		RADIAL LIMIT		AxIAL LIMIT							LBS.	oz.-IN.
DPP3	-3		0.1900		0.7774	0.473	0.495		20		5/32		0.645		0.302		0.018		0.005		2950		1700		2950		2830		0.005	0.04	1.0
DPP4	-4		0.2500		0.9014	0.491	0.620		22		5/32		0.715		0.411		0.032		0.005		5370		1800		3550		3020		0.006	0.06	1.0
DPP5	-5		0.3125		1.2500	0.687	0.745		22		15/64		1.069		0.469		0.032		0.015		11000		4000		7360		6250		0.006	0.17	1.5
DPP6	-6		0.3750		1.4375	0.794	0.870		20		9/32		1.222		0.551		0.032		0.015		15760		5300		9690		8120		0.006	0.26	2.0
DPP8	-8		0.5000		1.6875	0.856	0.932		20		11/32		1.473		0.733		0.044		0.015		23600		7800		14100		11600		0.007	0.38	3.0
DPP10	-10		0.6250		1.9375	0.920	0.995		24		11/32		1.686		0.891		0.044		0.015		28400		9400		15300		13100		0.007	0.53	4.5
Radial internal clearance: .0004 to .0010
MDPP- Precision Series
NHBB BASIC P/N		BORE d		O.D. D	RINg WIDTH			BAll COMPlEMENT				RINg SHOUlDER DIAMETER				RINg CHAMFER X 45°				lOAD RATINgS (lBS.)								MAX. AXIAl PlAy		APPROX. WEIgHT	MAX. STARTINg TORqUE^
																				STATIC				DyNAMIC RADIAl+
					OUTER H	INNER W		NO.		DIA.		OUTER F		INNER E		OUTER A		INNER C						RINg ROTATION
																				RADIAl		THRUST		INNER		OUTER
		+.0000 -.0003		+.0000 -.0004	+.000 -.005	+.0000 -.0025						REF.		REF.		+.015 -.000		+.015 -.000		RADIAL LIMIT		AxIAL LIMIT								LBS.	oz.-IN.
MDPP3		0.1900		0.7774	0.473	0.4950		20		5/32		0.645		0.302		0.018		0.005		2950		1700		2950		2830		0.003		0.04	1.0
MDPP4		0.2500		0.9014	0.491	0.6200		22		5/32		0.715		0.411		0.032		0.005		5370		1800		3550		3020		0.003		0.06	1.0
MDPP5		0.3125		1.2500	0.687	0.7450		22		15/64		1.069		0.469		0.032		0.015		11000		4000		7360		6250		0.003		0.17	1.5
MDPP6		0.3750		1.4375	0.794	0.8700		20		9/32		1.222		0.551		0.032		0.015		15760		5300		9690		8120		0.003		0.26	2.0
MDPP8		0.5000		1.6875	0.856	0.9320		20		11/32		1.473		0.733		0.044		0.015		23600		7800		14100		11600		0.003		0.38	3.0
MDPP10		0.6250		1.9375	0.920	0.9950		24		11/32		1.686		0.891		0.044		0.015		28400		9400		15300		13100		0.003		0.53	4.5

NHBB BASIC P/N	MS27646 DASH NO.		BORE d		O.D. D		RINg WIDTH			BAll COMPlEMENT				RINg SHOUlDER DIAMETER				RINg CHAMFER X 45°			lOAD RATINgS (lBS.)				APPROX. WEIgHT	MAX. STARTINg TORqUE^
																					STATIC		DyNAMIC RADIAl+
							OUTER H	INNER W		NO.		DIA.		OUTER F		INNER E		OUTER A	INNER C				RINg ROTATION
																					RADIAl	THRUST	INNER	OUTER
			+.0007 -.0007		+.0000 -.0010		+.000 -.005	+.000 -.005						REF.		REF.		+.015 -.000	+.015 -.000		RADIAL LIMIT	AxIAL LIMIT			LBS.	oz.-IN.[
B538DD	-38		0.6250		1.0625		0.250	0.281		21		1/8		0.898		0.785		0.015	0.015		3280	1500	1990	1820	0.03	2.0
B539DD	-39		0.7500		1.1875		0.250	0.281		24		1/8		1.022		0.905		0.015	0.015		3750	1700	2050	1900	0.04	2.0
B540DD	-40		0.8750		1.3125		0.250	0.281		27		1/8		1.139		1.025		0.015	0.015		4220	1900	2110	1970	0.05	3.0
B541DD	-41		1.0625		1.5000		0.250	0.281		32		1/8		1.337		1.229		0.015	0.015		5000	2200	2170	2020	0.06	4.0
B542DD	-42		1.3125		1.7500		0.250	0.281		38		1/8		1.578		1.464		0.015	0.015		5950	2700	2220	2130	0.09	4.0
B543DD	-43		1.5625		2.0000		0.250	0.281		44		1/8		1.820		1.706		0.015	0.015		6880	3200	2260	2180	0.10	5.0
B544DD	-44		1.8125 (1)		2.2500 (2)		0.250	0.281		51		1/8		2.109		1.980		0.015	0.015		7980	3600	2300	2220	0.11	6.0
B545DD	-45		2.0625 (1)		2.6250 (2)		0.250	0.281		59		1/8		2.413		2.299		0.015	0.015		9220	4000	2340	2260	0.15	7.0
B546DD	-46		2.3125 (1)		2.8750 (2)		0.250	0.281		65		1/8		2.656		2.542		0.015	0.015		10150	4400	2360	2280	0.17	8.0
Radial internal clearance: .0008 to .0018 (1) Bore (d) tolerance: +.0010 / -.0010 (2) O.D. (D) tolerance: +.0000 / -.0015
MB500DD (AS21428) Precision Series — Qualified to SAE AS7949
NHBB BASIC P/N		MS21428 DASH NO.		BORE d		O.D. D	RINg WIDTH				BAll COMPlEMENT				RINg SHOUlDER DIAMETER			RINg CHAMFER X 45°			lOAD RATINgS (lBS.)				APPROX. WEIgHT	MAX. STARTINg TORqUE^
																					STATIC		DyNAMIC RADIAl+
							OUTER H		INNER W		NO.		DIA.		OUTER F		INNER E	OUTER A		INNER C			RINg ROTATION
																					RADIAl	THRUST	INNER	OUTER
				+.0000 -.0005		+.0000 -.0005	+.000 -.005		+.0000 -.0025						REF.		REF.	+.015 -.000		+.015 -.000	RADIAL LIMIT	AxIAL LIMIT			LBS.	oz.-IN.[
MB538DD		-38		0.6250		1.0625	0.250		0.2810		21		1/8		0.898		0.785	0.015		0.015	3280	1500	1990	1820	0.03	2.0
MB539DD		-39		0.7500		1.1875	0.250		0.2810		24		1/8		1.022		0.905	0.015		0.015	3750	1700	2050	1900	0.04	2.0
MB540DD		-40		0.8750		1.3125	0.250		0.2810		27		1/8		1.139		1.025	0.015		0.015	4220	1900	2110	1970	0.05	3.0
MB541DD		-41		1.0625		1.5000	0.250		0.2810		32		1/8		1.337		1.223	0.015		0.015	5000	2200	2170	2020	0.06	4.0
MB542DD		-42		1.3125		1.7500	0.250		0.2810		38		1/8		1.578		1.464	0.015		0.015	5950	2700	2220	2130	0.09	4.0
MB543DD		-43		1.5625		2.0000	0.250		0.2810		44		1/8		1.820		1.706	0.015		0.015	6880	3200	2260	2180	0.10	5.0
MB544DD		-44		1.8125 (1)		2.2500 (2)	0.250		0.2810		51		1/8		2.110		1.980	0.015		0.015	7980	3600	2300	2220	0.11	6.0
MB545DD		-45		2.0625 (1)		2.6250 (2)	0.250		0.2810		59		1/8		2.413		2.299	0.015		0.015	9220	4000	2340	2260	0.15	7.0
MB546DD		-46		2.3125 (1)		2.8750 (2)	0.250		0.2810		65		1/8		2.656		2.542	0.015		0.015	10150	4400	2360	2280	0.17	8.0

NHBB BASIC P/N	BORE d	O.D. D	RINg WIDTH		BAll COMPlEMENT		RINg SHOUlDER DIAMETER		RINg CHAMFER X 45°		lOAD RATINgS (lBS.)				APPROX. WEIgHT
											STATIC		DyNAMIC RADIAl+
			OUTER H	INNER W	NO.	DIA.	OUTER F	INNER E	OUTER A	INNER C			RINg ROTATION
											RADIAl	THRUST	INNER	OUTER
	+.0007 -.0007	+.0000 -.0010	+.000 -.005	+.000 -.005			REF.	REF.	+.020 -.000	+.020 -.000	RADIAL LIMIT	AxIAL LIMIT			LBS.
B538	0.6250	1.0625	0.250	0.281	21	1/8	0.902	0.785	0.015	0.015	3280	1500	1990	1820	0.02
B539	0.7500	1.1875	0.250	0.281	24	1/8	1.018	0.905	0.015	0.015	3750	1700	2050	1900	0.03
B540	0.8750	1.3125	0.250	0.281	27	1/8	1.139	1.025	0.015	0.015	4220	1900	2110	1970	0.04
B541	1.0625	1.5000	0.250	0.281	32	1/8	1.338	1.223	0.015	0.015	5000	2200	2170	2020	0.05
B542	1.3125	1.7500	0.250	0.281	38	1/8	1.590	1.462	0.015	0.015	5950	2700	2220	2130	0.07
B543	1.5625	2.0000	0.250	0.281	44	1/8	1.831	1.706	0.015	0.015	6880	3200	2260	2180	0.08
B544	1.8125 (1)	2.2500 (2)	0.250	0.281	51	1/8	2.109	1.980	0.015	0.015	7980	3600	2300	2220	0.09
B545	2.0625 (1)	2.6250 (2)	0.250	0.281	59	1/8	2.424	2.299	0.015	0.015	9220	4000	2340	2260	0.13
B546	2.3125 (1)	2.8750 (2)	0.250	0.281	65	1/8	2.668	2.541	0.015	0.015	10150	4400	2360	2280	0.15
Radial internal clearance: .0008 to .0018 (1) Bore (d) tolerance: +.0010 / -.0010 (2) O.D. (D) tolerance: +.0000 / -.0015 MB500 Precision Series
NHBB BASIC P/N	BORE d	O.D. D	RINg WIDTH		BAll COMPlEMENT		RINg SHOUlDER DIAMETER		RINg CHAMFER X 45°		lOAD RATINgS (lBS.)				APPROX. WEIgHT
											STATIC		DyNAMIC RADIAl+
			OUTER H	INNER W	NO.	DIA.	OUTER F	INNER E	OUTER A	INNER C			RINg ROTATION
											RADIAl	THRUST	INNER	OUTER
	+.0000 -.0005	+.0000 -.0005	+.000 -.005	+.0000 -.0025			REF.	REF.	+.020 -.000	+.020 -.000	RADIAL LIMIT	AxIAL LIMIT			LBS.
MB538	0.6250	1.0625	0.250	0.2810	21	1/8	0.902	0.785	0.015	0.015	3280	1500	1990	1820	0.02
MB539	0.7500	1.1875	0.250	0.2810	24	1/8	1.022	0.905	0.015	0.015	3750	1700	2050	1900	0.03
MB540	0.8750	1.3125	0.250	0.2810	27	1/8	1.140	1.025	0.015	0.015	4220	1900	2110	1970	0.04
MB541	1.0625	1.5000	0.250	0.2810	32	1/8	1.338	1.223	0.015	0.015	5000	2200	2170	2020	0.05
MB542	1.3125	1.7500	0.250	0.2810	38	1/8	1.590	1.462	0.015	0.015	5950	2700	2220	2130	0.07
MB543	1.5625	2.0000	0.250	0.2810	44	1/8	1.831	1.706	0.015	0.015	6880	3200	2260	2180	0.08
MB544	1.8125 (1)	2.2500 (2)	0.250	0.2810	51	1/8	2.109	1.980	0.015	0.015	7980	3600	2300	2220	0.09
MB545	2.0625 (1)	2.6250 (2)	0.250	0.2810	59	1/8	2.424	2.299	0.015	0.015	9220	4000	2340	2260	0.13
MB546	2.3125 (1)	2.8750 (2)	0.250	0.2810	65	1/8	2.668	2.541	0.015	0.015	10150	4400	2360	2280	0.15

NHBB BASIC P/N	BORE d	O.D. D	RINg WIDTH		BAll COMPlEMENT		RINg SHOUlDER DIAMETER		RINg CHAMFER X 45°		lOAD RATINgS (lBS.)				APPROX. WEIgHT
											STATIC		DyNAMIC RADIAl+
			OUTER H	INNER W	NO.	DIA.	OUTER F	INNER E	OUTER A	INNER C			RINg ROTATION
											RADIAl	THRUST	INNER	OUTER
	+.0000 -.0005	+.0000 -.0005	+.000 -.005	+.000 -.005			REF.	REF.	+.020 -.000	+.020 -.000	RADIAL LIMIT	AxIAL LIMIT			LBS.
B5538Wzz	0.6250	1.0625	0.500	0.562	40	1/8	0.883	0.759	0.015	0.015	6250	2060	3040	2790	0.04
B5539Wzz	0.7500	1.1875	0.500	0.562	46	1/8	1.002	0.878	0.015	0.015	7190	2370	3130	2910	0.06
B5540Wzz	0.8750	1.3125	0.500	0.562	52	1/8	1.121	0.997	0.015	0.015	8120	2680	3210	3010	0.08
B5541Wzz	1.0625	1.5000	0.500	0.562	62	1/8	1.320	1.195	0.015	0.015	9690	3200	3310	3130	0.10
B5542Wzz	1.3125	1.7500	0.500	0.562	74	1/8	(3)	1.430	0.015	0.015	11600	3820	3400	3250	0.14
B5543Wzz	1.5625	2.0000	0.500	0.562	86	1/8	1.800	1.675	0.015	0.015	13400	4430	3470	3330	0.16
B5544Wzz	1.8125 (1)	2.2500 (2)	0.500	0.562	100	1/8	2.075	1.951	0.015	0.015	15600	5160	3520	3390	0.18
B5545Wzz	2.0625 (1)	2.6250 (2)	0.500	0.562	116	1/8	(3)	2.265	0.015	0.015	18100	5980	3560	3460	0.26
B5546Wzz	2.3125 (1)	2.8750 (2)	0.500	0.562	128	1/8	(3)	2.505	0.015	0.015	20000	6600	3680	3490	0.30

Grease Seals Wear Sleeves，Oil Seals，V-Rings，Pulleys，Sprockets，V-Belts，Tapered Roller Bearings，Cam Followers，Mounted Units，Needle Bearings，Precision BearingsRod Ends，Roller Bearings，Spherical Roller Bearings，Spherical Bushings，Thrust Bearings，Grease，Ball Bearings，Chain，Actuators，Profile Rail，Ball Screws，Ball Bushings，Locknuts/Washers，Bearing Heaters，Lubricators，Precision Shafting

NHBB Ball Bearing KSP3L KSP4A KSP5A CAB bearings FACTORY

Spot bearing model table, Model substitution Cross-reference Brand model reference Model substitution Substitute Bearing interchange Bearing brand replacement Model replace

Leave a Comment Cancel Reply