NHBB Ball Bearing MKP3AL MKP3A MKP4A

CAB bearings Factory is beaings rulman roulment rodamiento rolamento lager Подшипник factory manufactuers suppler authrised distirbutor wholesales sales shop agents.

We produce and deal with oil seals chains industrial belts gearbox parts accessories SKF bearings FAG NSK Timken INA KOYO NTN

www.precision-bearings.com

Spot bearing model table, Model substitution Cross-reference Brand model reference Model substitution Substitute Bearing interchange Bearing brand replacement Model replace

NHBB BASIC P/N	MS27640 DASH NO.		BORE d		O.D. D		RINg WIDTH				BAll COMPlEMENT				RINg SHOUlDER DIAMETER				RINg CHAMFER X 45°				lOAD RATINgS (lBS.)							APPROX. WEIgHT	MAX. STARTINg TORqUE^
																							STATIC				DyNAMIC RADIAl+
							OUTER H		INNER W		NO.		DIA.		OUTER F		INNER E		OUTER A		INNER C						RINg ROTATION
																							RADIAl		THRUST		INNER	OUTER
			+.0000 -.0005		+.0000 -.0005		+.000 -.005		+.000 -.005						REF.		REF.		+.015 -.000		+.015 -.000		RADIAL LIMIT		AxIAL LIMIT					LBS.	oz.-IN.
KP3L(1)	-3A		0.1900		0.6250		0.203		0.245		10		1/8		0.537		0.272		0.010		0.005		1560		700		1520	1260		0.01	1.0
KP3	-3		0.1900		0.7774		0.270		0.297		12		1/8		0.620		0.331		0.022		0.005		1880		900		1700	1450		0.03	1.0
KP4	-4		0.2500		0.9014		0.335		0.484		11		5/32		0.735		0.390		0.032		0.005		2680		1200		2410	2030		0.04	1.0
KP5	-5		0.3125		1.2500		0.375		0.558		9		1/4		1.009		0.472		0.032		0.015		5620		2500		4900	3970		0.09	1.0
KP6	-6		0.3750		1.4375		0.469		0.620		10		9/32		1.236		0.594		0.032		0.015		7910		3500		6540	5410		0.15	2.0
KP8	-8		0.5000		1.6875		0.500		0.620		10		11/32		1.463		0.768		0.044		0.015		11800		5200		9320	7700		0.21	3.0
KP10	-10		0.6250		1.9375		0.500		0.620		10		3/8		1.695		0.853		0.044		0.015		14100		6200		11000	9060		0.28	4.0
Radial internal clearance: .0004 to .0010 (1) Bonded PTFE seals – KP3L (MS27640-3A) only.
MKP- Precision Series
NHBB BASIC P/N		BORE d		O.D. D		RINg WIDTH				BAll COMPlEMENT				RINg SHOUlDER DIAMETER				RINg CHAMFER X 45°				lOAD RATINgS (lBS.)							APPROX. WEIgHT		MAX. STARTINg TORqUE^
																						STATIC				DyNAMIC RADIAl+
						OUTER H		INNER W		NO.		DIA.		OUTER F		INNER E		OUTER A		INNER C						RINg ROTATION
																						RADIAl		THRUST		INNER		OUTER
		+.0000 -.0003		+.0000 -.0004		+.000 -.005		+.0000 -.0025						REF.		REF.		+.015 -.000		+.015 -.000		RADIAL LIMIT		AxIAL LIMIT					LBS.		oz.-IN.
MKP3L(1)		0.1900		0.6250		0.203		0.2450		10		1/8		0.537		0.272		0.010		0.005		1560		700		1520		1260	0.01		1.0
MKP3		0.1900		0.7774		0.270		0.2970		12		1/8		0.620		0.331		0.022		0.005		1880		900		1700		1450	0.03		1.0
MKP4		0.2500		0.9014		0.335		0.4840		11		5/32		0.735		0.390		0.032		0.005		2680		1200		2410		2030	0.04		1.0
MKP5		0.3125		1.2500		0.375		0.5580		9		1/4		1.009		0.472		0.032		0.015		5620		2500		4900		3970	0.09		1.0
MKP6		0.3750		1.4375		0.469		0.6200		10		9/32		1.236		0.594		0.032		0.015		7910		3500		6540		5410	0.15		2.0
MKP8		0.5000		1.6875		0.500		0.6200		10		11/32		1.463		0.768		0.044		0.015		11800		5200		9320		7700	0.21		3.0
MKP10		0.6250		1.9375		0.500		0.6200		10		3/8		1.695		0.853		0.044		0.015		14100		6200		11000		9060	0.28		4.0

NHBB BASIC P/N	MS27641 DASH NO.		BORE d		O.D. D		RINg WIDTH				BAll COMPlEMENT				RINg SHOUlDER DIAMETER				RINg CHAMFER X 45°				lOAD RATINgS (lBS.)							APPROX. WEIgHT	MAX. STARTINg TORqUE^
																							STATIC				DyNAMIC RADIAl+
							OUTER H		INNER W		NO.		DIA.		OUTER F		INNER E		OUTER A		INNER C						RINg ROTATION
																							RADIAl		THRUST		INNER	OUTER
			+.0000 -.0005		+.0000 -.0005		+.000 -.005		+.000 -.005						REF.		REF.		+.015 -.000		+.015 -.000		RADIAL LIMIT		AxIAL LIMIT					LBS.	oz.-IN.
KP3AL	(1)		0.1900		0.5000		0.196		0.237		11		3/32		0.420		0.258		0.012		0.005		970		430		962	813		0.01	1.0
KP3A	-3		0.1900		0.6250		0.234		0.297		10		1/8		0.531		0.297		0.016		0.005		1560		700		1500	1250		0.01	1.0
KP4A	-4		0.2500		0.7500		0.219		0.281		12		1/8		0.618		0.380		0.016		0.005		1880		900		1690	1450		0.02	1.5
KP5A	-5		0.3125		0.8125		0.234		0.297		14		1/8		0.697		0.417		0.016		0.015		2190		1000		1820	1600		0.02	1.5
KP6A	-6		0.3750		0.8750		0.250		0.313		16		1/8		0.772		0.493		0.016		0.015		2500		1100		1920	1710		0.03	2.0
KP8A	-8		0.5000		1.1250		0.313		0.375		16		5/32		0.980		0.616		0.016		0.015		3910		1700		2870	2550		0.05	2.5
KP10A	-10		0.6250		1.3750		0.344		0.406		14		7/32		1.242		0.768		0.032		0.015		6700		3000		4980	4360		0.08	3.0
KP12A	-12		0.7500		1.6250		0.375		0.437		16		15/64		1.434		0.919		0.032		0.015		8790		3900		5980	5320		0.13	3.0
KP16A	-16		1.0000		2.0000		0.438		0.500		19		1/4		1.790		1.238		0.032		0.015		11900		5200		7070	6400		0.22	4.0
KP20A	-20		1.2500		2.2500		0.438		0.500		22		1/4		1.975		1.540		0.032		0.015		13800		6100		7400	6810		0.26	5.0
Radial internal clearance: .0004 to .0010 (1) KP3AL equivalent not defined. MKP-A Precision Series
NHBB BASIC P/N		BORE d		O.D. D		RINg WIDTH				BAll COMPlEMENT				RINg SHOUlDER DIAMETER				RINg CHAMFER X 45°				lOAD RATINgS (lBS.)							APPROX. WEIgHT		MAX. STARTINg TORqUE^
																						STATIC				DyNAMIC RADIAl+
						OUTER H		INNER W		NO.		DIA.		OUTER F		INNER E		OUTER A		INNER C						RINg ROTATION
																						RADIAl		THRUST		INNER		OUTER
		+.0000 -.0003		+.0000 -.0004		+.000 -.005		+.0000 -.0025						REF.		REF.		+.015 -.000		+.015 -.000		RADIAL LIMIT		AxIAL LIMIT					LBS.		oz.-IN.
MKP3AL		0.1900		0.5000		0.196		0.2370		11		3/32		0.420		0.258		0.012		0.005		970		430		962		813	0.01		1.0
MKP3A		0.1900		0.6250		0.234		0.2970		10		1/8		0.531		0.297		0.016		0.005		1560		700		1500		1250	0.01		1.0
MKP4A		0.2500		0.7500		0.219		0.2810		12		1/8		0.618		0.380		0.016		0.005		1880		900		1690		1450	0.02		1.5
MKP5A		0.3125		0.8125		0.234		0.2970		14		1/8		0.697		0.417		0.016		0.015		2190		1000		1820		1600	0.02		1.5
MKP6A		0.3750		0.8750		0.250		0.3130		16		1/8		0.772		0.493		0.016		0.015		2500		1100		1920		1710	0.03		2.0
MKP8A		0.5000		1.1250		0.313		0.3750		16		5/32		0.980		0.616		0.016		0.015		3910		1700		2870		2550	0.05		2.5
MKP10A		0.6250		1.3750		0.344		0.4060		14		7/32		1.242		0.768		0.032		0.015		6700		3000		4980		4360	0.08		3.0
MKP12A		0.7500		1.6250		0.375		0.4370		16		15/64		1.434		0.919		0.032		0.015		8790		3900		5980		5320	0.13		3.0
MKP16A		1.0000		2.0000		0.438		0.5000		19		1/4		1.790		1.238		0.032		0.015		11900		5200		7070		6400	0.22		4.0
MKP20A		1.2500		2.2500		0.438		0.5000		22		1/4		1.975		1.540		0.032		0.015		13800		6100		7400		6810	0.26		5.0

NHBB BASIC P/N	MS27642 DASH NO.	BORE d	O.D. D	RINg WIDTH		BAll COMPlEMENT		RINg SHOUlDER DIAMETER		RINg CHAMFER X 45°		lOAD RATINgS (lBS.)				APPROX. WEIgHT	MAX. STARTINg TORqUE^
												STATIC		DyNAMIC RADIAl+
				OUTER H	INNER W	NO.	DIA.	OUTER F	INNER E	OUTER A	INNER C			RINg ROTATION
												RADIAl	THRUST	INNER	OUTER
		+.0000 -.0010	+.0000 -.0010	+.000 -.005	+.000 -.005			REF.	REF.	+.015 -.000	+.015 -.000	RADIAL LIMIT	AxIAL LIMIT			LBS.	oz.-IN.[
KP16B (1)	-16	1.0000 (3)	1.7500	0.375	0.437	23	3/16	1.589	1.189	0.024	0.024	8085	3600	4260	3960	0.14	5.0
KP21B (1)	-21	1.3130	2.0625	0.375	0.437	28	3/16	1.912	1.512	0.024	0.024	9840	4400	4590	4290	0.16	7.0
KP23B (1)	-23	1.4380	2.1875	0.375	0.437	30	3/16	1.988	1.624	0.024	0.024	10500	4700	4650	4360	0.17	9.0
KP25B (1)	-25	1.5630	2.3125	0.375	0.437	32	3/16	2.108	1.743	0.024	0.024	11300	5000	4680	4420	0.19	9.0
KP29B (1)	-29	1.8130	2.5625	0.375	0.437	36	3/16	2.349	1.980	0.024	0.024	12700	5600	4760	4530	0.21	14.0
KP33B (1)	-33	2.0630	2.8125	0.375	0.437	41	3/16	2.647	2.278	0.024	0.024	14400	6400	4820	4630	0.23	14.0
KP37B (1)	-37	2.3130	3.0625	0.375	0.437	45	3/16	2.886	2.516	0.024	0.024	15800	7000	4880	4690	0.26	20.0
KP47B (1)	-47	2.9380	3.8750	0.469	0.531	45	15/64	3.609	3.149	0.039	0.039	24700	10900	6600	6390	0.49	30.0
KP49B (1)	-49	3.0630	4.0000	0.469	0.531	44	1/4	3.785	3.262	0.039	0.039	27500	12100	8150	7840	0.53	32.0
KP52B (2)	-52	3.2500	4.1875	0.469	0.531	46	1/4	3.914	3.444	0.039	0.039	28700	12600	8210	7880	0.65	(4)
KP56B (2)	-56	3.5000	4.4375	0.469	0.531	50	1/4	4.248	3.730	0.039	0.039	31200	13700	8240	7970	0.70	(4)
KP60B (2)	-60	3.7500	4.6875	0.469	0.531	53	1/4	4.505	3.987	0.039	0.039	33100	14600	8290	8010	0.74	(4)
KP64B (2)	-64	4.0000	4.9375	0.469	0.531	56	1/4	4.728	4.246	0.039	0.039	35000	15400	8350	8100	0.78	(4)
KP68B (2)	-68	4.2500	5.3125	0.531	0.593	53	9/32	5.060	4.516	0.039	0.039	41900	18400	10280	9900	0.87	(4)
KP72B (2)	-72	4.5000	5.5625	0.531	0.593	56	9/32	5.322	4.776	0.039	0.039	44300	19500	10330	10000	0.92	(4)
KP76B (2)	-76	4.7500	5.8125	0.531	0.593	59	9/32	5.594	5.045	0.039	0.039	46700	20500	10350	10050	1.00	(4)
KP80B (2)	-80	5.0000	6.0625	0.531	0.593	61	9/32	5.786	5.242	0.039	0.039	48200	21200	10360	10090	1.04	(4)
KP84B (2)	-84	5.2500	6.3125	0.531	0.593	64	9/32	6.048	5.504	0.039	0.039	50600	22300	10420	10120	1.09	(4)

NHBB BASIC P/N	MS27648 DASH NO.	BORE d	O.D. D	RINg WIDTH		MIS- AlIgNMENT ANglE M°	SPHERICAl DIA. J	BAll COMPlEMENT		RINg SHOUlDER DIAMETER		RINg CHAMFER X 45°		lOAD RATINgS (lBS.)				APPROX. WEIgHT	MAX. STARTINg TORqUE^
														STATIC		DyNAMIC RADIAl+
				OUTER H*	INNER W			NO.	DIA.	INNER E	HOUSINg K†	OUTER A	INNER C			RINg ROTATION
														RADIAl	THRUST	INNER	OUTER
		+.0000 -.0010	+.0000 -.0010	+.000 -.005	+.000 -.005		REF.			REF.	REF.	+.015 -.000	+.015 -.000	RADIAL LIMIT	AxIAL LIMIT			LBS.	oz.-IN.[
KP16BS	-16	1.0000 (1)	1.9375	0.375	0.437	± 7.42	1.742	23	3/16	1.186	1.724	0.024	0.024	8085	1600	4260	3960	0.18	5.0
KP21BS	-21	1.3130	2.2500	0.375	0.437	± 6.50	2.054	28	3/16	1.509	2.021	0.024	0.024	9840	2000	4590	4290	0.20	7.0
KP23BS	-23	1.4380	2.3750	0.375	0.437	± 6.00	2.179	30	3/16	1.621	2.168	0.024	0.024	10500	2200	4650	4360	0.22	9.0
KP25BS	-25	1.5630	2.5000	0.375	0.437	± 5.75	2.307	32	3/16	1.740	2.295	0.024	0.024	11300	2300	4680	4420	0.25	9.0
KP29BS	-29	1.8130	2.7500	0.375	0.437	± 5.00	2.554	36	3/16	1.980	2.548	0.024	0.024	12700	2600	4760	4530	0.27	14.0
KP33BS	-33	2.0630	3.0000	0.375	0.437	± 5.00	2.804	41	3/16	2.278	2.799	0.024	0.024	14400	2900	4820	4630	0.30	14.0
KP37BS	-37	2.3130	3.2500	0.375	0.437	± 4.50	3.054	45	3/16	2.516	3.051	0.024	0.024	15800	3200	4880	4690	0.33	20.0
KP47BS	-47	2.9380	4.1250	0.469	0.531	± 4.50	3.867	45	15/64	3.149	3.861	0.039	0.039	24700	5000	6600	6390	0.64	30.0
KP48BS	-48	3.0000	4.2500	0.469	0.531	± 4.00	3.991	44	1/4	3.262	3.986	0.039	0.039	27500	5500	8150	7840	0.69	30.0
KP49BS	-49	3.0630	4.2500	0.469	0.531	± 4.00	3.991	44	1/4	3.262	3.986	0.039	0.039	27500	5500	8150	7840	0.69	32.0

NHBB BASIC P/N	BORE d	O.D. D	RINg WIDTH		MIS- AlIgNMENT ANglE M°	SPHERICAl DIA. J	BAll COMPlEMENT		RINg SHOUlDER DIAMETER		RINg CHAMFER X 45°		lOAD RATINgS (lBS.)				APPROX. WEIgHT	MAX. STARTINg TORqUE^
													STATIC		DyNAMIC RADIAl+
			OUTER H*	INNER W			NO.	DIA.	INNER E	HOUSINg K†	OUTER A	INNER C			RINg ROTATION
													RADIAl	THRUST	INNER	OUTER
	+.0000 -.0005	+.0000 -.0010	+.000 -.005	+.0000 -.0025		REF.			REF.	REF.	+.015 -.000	+.015 -.000	RADIAL LIMIT	AxIAL LIMIT			LBS.	oz.-IN.
[ MKP16BS	1.0000	1.9375	0.375	0.4370	± 7.42	1.742	23	3/16	1.186	1.724	0.024	0.024	8085	1600	4260	3960	0.18	5.0
MKP21BS	1.3125	2.2500	0.375	0.4370	± 6.50	2.054	28	3/16	1.509	2.021	0.024	0.024	9840	2000	4590	4290	0.20	7.0
MKP23BS	1.4375	2.3750	0.375	0.4370	± 6.00	2.179	30	3/16	1.621	2.168	0.024	0.024	10500	2200	4650	4360	0.22	9.0
MKP25BS	1.5625	2.5000	0.375	0.4370	± 5.75	2.307	32	3/16	1.740	2.295	0.024	0.024	11300	2300	4680	4420	0.25	9.0
MKP29BS	1.8125	2.7500	0.375	0.4370	± 5.00	2.554	36	3/16	1.980	2.548	0.024	0.024	12700	2600	4760	4530	0.27	14.0
MKP33BS	2.0625	3.0000	0.375	0.4370	± 5.00	2.804	41	3/16	2.278	2.799	0.024	0.024	14400	2900	4820	4630	0.30	14.0
MKP37BS	2.3125	3.2500	0.375	0.4370	± 4.50	3.054	45	3/16	2.516	3.051	0.024	0.024	15800	3200	4880	4690	0.33	20.0
MKP47BS	2.9375	4.1250	0.469	0.5310	± 4.50	3.867	45	15/64	3.149	3.861	0.039	0.039	24700	5000	6600	6390	0.64	30.0
MKP48BS	3.0000	4.2500	0.469	0.5310	± 4.00	3.991	44	1/4	3.262	3.986	0.039	0.039	27500	5500	8150	7840	0.69	30.0
MKP49BS	3.0625	4.2500	0.469	0.5310	± 4.00	3.991	44	1/4	3.262	3.986	0.039	0.039	27500	5500	8150	7840	0.69	32.0

Grease Seals Wear Sleeves，Oil Seals，V-Rings，Pulleys，Sprockets，V-Belts，Tapered Roller Bearings，Cam Followers，Mounted Units，Needle Bearings，Precision BearingsRod Ends，Roller Bearings，Spherical Roller Bearings，Spherical Bushings，Thrust Bearings，Grease，Ball Bearings，Chain，Actuators，Profile Rail，Ball Screws，Ball Bushings，Locknuts/Washers，Bearing Heaters，Lubricators，Precision Shafting

NHBB Ball Bearing MKP3AL MKP3A MKP4A CAB bearings FACTORY

Spot bearing model table, Model substitution Cross-reference Brand model reference Model substitution Substitute Bearing interchange Bearing brand replacement Model replace

Leave a Comment Cancel Reply